WIDS

Overview

Our Wireless Intrusion Detection System (WIDS) is much more than a level detector or address scanner.  Because we can fully analyze over the air packet data, you can identify devices even if they roll (randomize) their addresses.  Set alerts for types of devices like trackers, phones, and drones (with DroneID). Keep track of devices that are approved vs. not approved. The system can be configured to be purely passive or go active to further interrogate devices.  Devices can be mapped inside your space or outside with the help of on-board GPS.

Analyze what happened over the collection period; what devices were talking to whom, what were the signal levels, where did they show up and when?

Our WIDS is built around the PANalyzr; a hand-held, USB-powered, state-of-the-art passive air packet analyzer for the IoT market.  With a sensitive but portable wideband Software Defined Radio front end, it can capture most signals in the 2.4 to 2.5 GHZ ISM band; Bluetooth Classic (BTC), Bluetooth Low Energy (BLE), Wi-Fi, and IEEE 802.15.4 (Zigbee, Thread, etc.). Our IoT Expansion Pack adds IEEE 802.15.4 single channel (per adapter) processing, along with Wi-Fi and Z-Wave for non-2.4 GHz band coverage.

Additional Features

• Start with one sensor node and one monitoring station, then add as many sensor nodes as you need.
• Sensor to Monitor system is connected via ethernet (Internet or Intranet)
• Nodes are synched in time to the Monitor
• Analytics to combine the device information seen across nodes
• Use a tablet or laptop (like our Porta-PAN) as the monitor and then walk down the device
• Set devices as approved or not, alert on device types, compare a baseline survey vs subsequent runs
• We offer a "fly away kit" with 4 sensor nodes, one Porta-PAN and everything else you need
• We offer the sensor and monitor mode software as well if you have your own PANalyzr hardware
• And many more features!

Sales

For sales (or inquiries) from inside of the United States, please contact us at: sales@spanalytics.com.

For sales (or inquiries) from outside of the United States, please contact us at: international.sales@spanalytics.com.

End User Agreement

By purchasing this product, you agree that you are the End User of this product and will not be transferring ownership to another party.