Sold out

WIDS





4.8 (3)

Wireless Intrusion Detection System with built-in PANalyzr

$15,995USD

Supported Protocols

Bluetooth Low Energy (LE)

Bluetooth Classic (BR/EDR)

IEEE 802.15.4

WiFi 802.11

Z-Wave / Zigbee

Buy

Related Products

Overview

Details

Our Wireless Intrusion Detection System (WIDS) is much more than a level detector or address scanner.  Because we can fully analyze over the air packet data, you can identify devices even if they roll (randomize) their addresses.  Set alerts for types of devices like trackers, phones, and drones (with DroneID). Keep track of devices that are approved vs. not approved. The system can be configured to be purely passive or go active to further interrogate devices.  Devices can be mapped inside your space or outside with the help of on-board GPS.

Analyze what happened over the collection period; what devices were talking to whom, what were the signal levels, where did they show up and when?

Our WIDS is built around the PANalyzr; a hand-held, USB-powered, state-of-the-art passive air packet analyzer for the IoT market.  With a sensitive but portable wideband Software Defined Radio front end, it can capture most signals in the 2.4 to 2.5 GHZ ISM band; Bluetooth Classic (BTC), Bluetooth Low Energy (BLE), Wi-Fi, and IEEE 802.15.4 (Zigbee, Thread, etc.). Our IoT Expansion Pack adds IEEE 802.15.4 single channel (per adapter) processing, along with Wi-Fi and Z-Wave for non-2.4 GHz band coverage.

Additional Features

  • Start one monitoring station, then add as many sensor nodes as you need.
  • Sensor to Monitor system is connected via ethernet (Internet or Intranet)
  • Nodes are synched in time to the Monitor
  • Analytics to combine the device information seen across nodes
  • Use a tablet or laptop (like our Porta-PAN) as the monitor and then walk down the device
  • Set devices as approved or not, alert on device types, compare a baseline survey vs subsequent runs
  • We offer a “fly away kit” with 4 sensor nodes, one Porta-PAN and everything else you need
  • We offer the sensor and monitor mode software as well if you have your own PANalyzr hardware
  • And many more features!

Tech Specs

CASE

Dimensions: 12 x 12 x 10in

Material: Plastic

NETWORK

Adapter: 50TB/s Ethernet Adapter Model 2

MEMORY

System Memory: 8GB DDR4 3600 MHz

STORAGE

Model: TBD

Base Storage: 500GB NVMe SSD

PROCESSOR

Brand: Intel Core

Model: i5-12500K

Core: 8-Cores

GENERAL

Warranty: 1 Year

Support: 1 Year

Model Number: SPAN7-WD1E

MISC

International Sales

For sales (or inquiries) from outside of the United States, please contact us at: international.sales@spanalytics.com.

End User Agreement

By purchasing this product, you agree that you are the End User of this product and will not be transferring ownership to another party.

Downloads

FAQs

Why am I not getting Z-Wave packets?

Ensure the correct driver has been installed on the WIDS machine. The driver can be found under your Spanalytics (x86) directory after installation. For more information please review the Software Install Procedure.

How do I connect a FindIT device to the system?

You will need to connect both your PANalyzr and the FindIT device to the monitor via USB-c and USB-a respectively. Connect the FindIT coaxial cable to the PANalyzr SDR and launch the software. For further information download our WIDS User Guide.

Newsletter Signup

Global Headquarters

4190 Innslake Drive
Glen Allen, VA 23060
(804) 364-1050
info@spanalytics.com
support@spanalytics.com

Support Phone #: (804) 729-6432

International Contact
For sales (or inquiries) from outside of the United States, please contact us at: international.sales@spanalytics.com.

en_USEN